BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR COURTESY SWITCH (BACK DOOR LOCK ASSEMBLY)


    1. Check the operation of the door lock motor.


      1. Move the door lock to the lock position.

        A005CLPE01

      2. Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → 2 (ACT+)

        Auxiliary battery negative (-) → 1 (ACT-)

        		 Unlocks

        If the result is not as specified, replace the back door lock assembly.

    2. Check the operation of the door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (ACT-) - 3 (D+) Locked 10 kΩ or higher
        1 (ACT-) - 3 (D+) Unlocked Below 1 Ω
        Text in Illustration
        *a

        Component without harness connected

        (Back Door Lock Assembly)
        *b Lock
        *c Unlock

        If the result is not as specified, replace the back door lock assembly.