REAR FLOOR PAN ASSEMBLY REPLACEMENT

A01GHE7


  1. REMOVAL

    Symbol Meaning
    B002F5A Remove Weld Points
    B002F3W Remove Weld Points
    B002F3X Remove Weld Points
    A01GHBV
    A01GHH0C01
    *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B002F3I Plug Weld
    B002F3M Plug Weld
    B002F4M Plug Weld
    B002F4X Fillet Weld

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.1, rear floor croosmember bracket, rear floor panel reinforcement No.2 and rear floor pan extension with the standard number of welding points.

      A01GHGAC01
      *A w/o Spare Tire *B Upper Face
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.1
      *3 REAR FLOOR CROSSMEMBER BRACKET *4 REAR FLOOR PANEL REINFORCEMENT NO.2
      *5 REAR FLOOR PAN EXTENSION - -

    2. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.1, rear floor croosmember bracket, rear floor panel reinforcement No.2, spare wheel clamp bracket and rear floor pan extension with the standard number of welding points.

      A01GHDFC01
      *A w/ Spare Tire *B Upper Face
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.1
      *3 REAR FLOOR CROSSMEMBER BRACKET *4 REAR FLOOR PANEL REINFORCEMENT NO.2
      *5 SPARE WHEEL CLAMP BRACKET *6 REAR FLOOR PAN EXTENSION

    3. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement and weld bolts with the standard number of welding points.

      A01GH86C01
      *A Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT
      *3 WELD BOLTS - -
      A01GHFN
      A01GHIFC01
      *A LH Side *B RH Side

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.