FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    A01E250E01

    1. Attach the 12 claws to install the airbag.

    2. Attach the clamp to the bracket.

    3. A01E1HV

      Tighten the 2 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }
    4. A01DWA0

      Connect the connector to the airbag.

      Note

      When handling the airbag connector, do not damage the airbag wire harness.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01E050E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01E1H5E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  5. INSPECT SRS WARNING LIGHT


    1. Check the SRS warning light Click here.