POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

*: Use the intelligent tester.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Result

    NEXT
    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage

    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result

    Result

    NEXT
    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Result

      Result

      Proceed to

      CAN DTC is not output

      A

      CAN DTC is output

      B
    B

    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

    Click here

    A

  4. CHECK FOR DTC*

    1. Check for DTCs.

      Click here

    2. Clear the DTC(s).

      Click here

    3. Recheck for DTCs.

      Click here

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC is output

      B
    B

    GO TO DIAGNOSTIC TROUBLE CODE CHART

    Click here

    A

  5. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click here

      Result

      Result

      Proceed to

      Fault is not listed in problem symptoms table

      A

      Fault is listed in problem symptoms table

      B
    B

    REPAIRClick here

    A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Terminals of ECU.

      Click here

    2. Data List / Active Test.

      Click here

      Result

      Result

      NEXT
    NEXT

  7. REPAIR

    Result

    Result

    NEXT
    NEXT

  8. CONFIRMATION TEST

    Result

    Result

    NEXT
    NEXT

    END