SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A01LB9AC01
      B0069FO Slide in this Direction
      B00692L Protective Tape

      Apply protective tape as shown in the illustration.

    2. Slide the side turn signal light assembly LH toward the front of the vehicle.

    3. Raise the side turn signal light assembly LH to detach the claw and remove it.

    4. A01LAU7

      Disconnect the connector.