CONDENSER(except 1AD-FTV) REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   1. 

      *a

      Modulator

      Using pliers, install a new cooler dryer onto the modulator.

   2. for Type A:

      1. 

         Sufficiently apply compressor oil to the O-ring and fitting surface of a new cap.

         Compressor Oil

         ND-OIL 8 or equivalent

   3. for Type B:

      1. 

         Sufficiently apply compressor oil to 3 O-rings and fitting surfaces of a new cap.

         Compressor Oil

         ND-OIL 8 or equivalent

   4. 

      Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

      for Type A

      2.9 N*m

      30 kgf*cm

      26 in.*lbf

      for Type B

      4.0 N*m

      41 kgf*cm

      35 in.*lbf

2. INSTALL NO. 1 COOLER CONDENSER CUSHION

   

   1. Install the 4 No. 1 cooler condenser cushions.