PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A001Y70C01
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always Below 6 Ω
        3 - 2 Always Below 6 Ω
        3 - 4 Always Below 6 Ω
        5 - 4 Always Below 6 Ω

        If the result is not as specified, replace the quick heater assembly.