AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) Speaker Circuit

DTC Code DTC Name
Speaker Circuit

DESCRIPTION

The sound signals amplified by the radio receiver assembly are sent to the speakers from the radio receiver assembly via the speaker circuit.

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly, telematics transceiver* or speakers.

  • *: w/ Telematics Transceiver

WIRING DIAGRAM

E350599E03

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

Click here

PROCEDURE

  1. CHECK VEHICLE CONDITION

    1. Check the vehicle condition.

    Result

    Result

    Proceed to

    w/o Telematics Transceiver

    A

    w/ Telematics Transceiver

    B
    B

    CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)Click here

    A

  2. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

    • *1: for LH Side

    • *2: for RH Side

    1. Disconnect the G46 and G47 radio receiver assembly connectors.

    2. Disconnect the J1*1 and/or I1*2 front No. 1 speaker assembly connector.

    3. Disconnect the L2*1 and/or K2*2 rear speaker assembly connector.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 1. for LH Side:

      Tester Connection

      Condition

      Specified Condition

      G46-2 (FL+) - J1-1

      Always

      Below 1 Ω

      G46-6 (FL-) -J1-2

      Always

      Below 1 Ω

      G47-2 (RL+) - L2-1

      Always

      Below 1 Ω

      G47-6 (RL-) - L2-2

      Always

      Below 1 Ω

      G46-2 (FL+) - Body ground

      Always

      10 kΩ or higher

      G46-6 (FL-) - Body ground

      Always

      10 kΩ or higher

      G47-2 (RL+) - Body ground

      Always

      10 kΩ or higher

      G47-6 (RL-) - Body ground

      Always

      10 kΩ or higher
      Table 2. for RH Side:

      Tester Connection

      Condition

      Specified Condition

      G46-1 (FR+) - I1-1

      Always

      Below 1 Ω

      G46-5 (FR-) - I1-2

      Always

      Below 1 Ω

      G47-1 (RR+) - K2-1

      Always

      Below 1 Ω

      G47-3 (RR-) - K2-2

      Always

      Below 1 Ω

      G46-1 (FR+) - Body ground

      Always

      10 kΩ or higher

      G46-5 (FR-) - Body ground

      Always

      10 kΩ or higher

      G47-1 (RR+) - Body ground

      Always

      10 kΩ or higher

      G47-3 (RR-) - Body ground

      Always

      10 kΩ or higher

    Result

    Proceed to

    OK

    NG
    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  3. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. Disconnect the J1*1 and/or I1*2 front No. 1 speaker assembly connector.

      *1: for LH Side

      *2: for RH Side

    2. Inspect the front No. 1 speaker assembly.

      Click here

    Result

    Proceed to

    OK

    NG
    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

    Click here

    OK

  4. INSPECT REAR SPEAKER ASSEMBLY

    1. Disconnect the L2*1 and/or K2*2 rear speaker assembly connector.

      *1: for LH Side

      *2: for RH Side

    2. Inspect the rear speaker assembly.

      Click here

    Result

    Proceed to

    OK

    NG
    OK

    REPLACE RADIO RECEIVER ASSEMBLY

    Click here

    NG

    REPLACE REAR SPEAKER ASSEMBLY

    Click here

  5. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

    • *1: for LH Side

    • *2: for RH Side

    1. Disconnect the G46 and G47 radio receiver assembly connectors.

    2. Disconnect the J1*1 and/or I1*2 front No. 1 speaker assembly connector.

    3. Disconnect the L2*1 and/or K2*2 rear speaker assembly connector.

    4. Disconnect the M38 Telematics transceiver connector.

    5. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 3. for LH Side:

      Tester Connection

      Condition

      Specified Condition

      G46-2 (FL+) - J1-1

      Always

      Below 1 Ω

      G46-6 (FL-) -J1-2

      Always

      Below 1 Ω

      G47-2 (RL+) - L2-1

      Always

      Below 1 Ω

      G47-6 (RL-) - L2-2

      Always

      Below 1 Ω

      G46-2 (FL+) - Body ground

      Always

      10 kΩ or higher

      G46-6 (FL-) - Body ground

      Always

      10 kΩ or higher

      G47-2 (RL+) - Body ground

      Always

      10 kΩ or higher

      G47-6 (RL-) - Body ground

      Always

      10 kΩ or higher
      Table 4. for RH Side:

      Tester Connection

      Condition

      Specified Condition

      G46-1 (FR+) - M38-2 (SPI+)

      Always

      Below 1 Ω

      G46-5 (FR-) - M38-3 (SPI-)

      Always

      Below 1 Ω

      M38-5 (SPO+) - I1-1

      Always

      Below 1 Ω

      M38-6 (SPO-) - I1-2

      Always

      Below 1 Ω

      G47-1 (RR+) - K2-1

      Always

      Below 1 Ω

      G47-3 (RR-) - K2-2

      Always

      Below 1 Ω

      G46-1 (FR+) - Body ground

      Always

      10 kΩ or higher

      G46-5 (FR-) - Body ground

      Always

      10 kΩ or higher

      M38-5 (SPO+) - Body ground

      Always

      10 kΩ or higher

      M38-6 (SPO-) - Body ground

      Always

      10 kΩ or higher

      G47-1 (RR+) - Body ground

      Always

      10 kΩ or higher

      G47-3 (RR-) - Body ground

      Always

      10 kΩ or higher

    Result

    Proceed to

    OK

    NG
    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  6. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. Disconnect the J1*1 and/or I1*2 front No. 1 speaker assembly connector.

      *1: for LH Side

      *2: for RH Side

    2. Inspect the front No. 1 speaker assembly.

      Click here

    Result

    Proceed to

    OK

    NG
    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

    Click here

    OK

  7. INSPECT REAR SPEAKER ASSEMBLY

    1. Disconnect the L2*1 and/or K2*2 rear speaker assembly connector.

      *1: for LH Side

      *2: for RH Side

    2. Inspect the rear speaker assembly.

      Click here

    Result

    Proceed to

    OK

    NG
    NG

    REPLACE REAR SPEAKER ASSEMBLY

    Click here

    OK

  8. CHECK TELEMATICS TRANSCEIVER

    1. Replace the telematics transceiver with a new one.

      Click here

    2. Check the malfunction disappears.

      OK

      Malfunction disappears.

    Result

    Proceed to

    OK

    NG
    OK

    END (TELEMATICS TRANSCEIVER IS DEFECTIVE)

    NG

    REPLACE RADIO RECEIVER ASSEMBLY

    Click here