SFI SYSTEM(w/o Canister Pump Module) PARTS LOCATION
ILLUSTRATION
*1 |
FUEL PUMP |
*2 |
ST RELAY |
*3 |
ST FUSE EFI-MAIN NO. 1 FUSE IG2 FUSE AM2 FUSE ETCS FUSE EFI-MAIN NO. 2 FUSE EFI NO. 1 FUSE EFI NO. 2 FUSE ALT FUSE |
*4 |
EFI-MAIN NO. 1 RELAY EFI-MAIN NO. 2 RELAY IG2 RELAY C/OPN RELAY |
*5 |
NO. 2 ENGINE ROOM RELAY BLOCK ASSEMBLY |
*6 |
ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY |
ILLUSTRATION
*1 |
MASS AIR FLOW METER SUB-ASSEMBLY |
*2 |
PURGE VSV |
*3 |
ECM |
*4 |
PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
ILLUSTRATION
*1 |
AIR FUEL RATIO SENSOR |
*2 |
ENGINE COOLANT TEMPERATURE SENSOR |
*3 |
INTAKE AIR CONTROL VALVE ACTUATOR |
*4 |
IGNITION COIL ASSEMBLY |
*5 |
CAMSHAFT POSITION SENSOR (for Exhaust Camshaft) |
*6 |
CAMSHAFT POSITION SENSOR (for Intake Camshaft) |
ILLUSTRATION
*1 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Camshaft) |
*2 |
CRANKSHAFT POSITION SENSOR |
*3 |
FUEL INJECTOR ASSEMBLY |
*4 |
HEATED OXYGEN SENSOR |
*5 |
KNOCK SENSOR |
*6 |
THROTTLE WITH MOTOR BODY |
*7 |
VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) |
*8 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Camshaft) |
ILLUSTRATION
*1 |
ACCELERATOR PEDAL SENSOR ASSEMBLY |
*2 |
CLUTCH START SWITCH ASSEMBLY |
*3 |
ENGINE SWITCH (with Entry and Start System) |
*4 |
IGNITION SWITCH ASSEMBLY (without Entry and Start System) |
*5 |
DLC3 |
*6 |
INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY |
*7 |
IGN FUSE STOP FUSE METER FUSE |
*8 |
COMBINATION METER ASSEMBLY |
*9 |
STOP LIGHT SWITCH ASSEMBLY |
- |
- |
ILLUSTRATION
*1 |
ACCELERATOR PEDAL SENSOR ASSEMBLY |
*2 |
CLUTCH START SWITCH ASSEMBLY |
*3 |
ENGINE SWITCH (with Entry and Start System) |
*4 |
IGNITION SWITCH ASSEMBLY (without Entry and Start System) |
*5 |
DLC3 |
*6 |
INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY |
*7 |
IGN FUSE STOP FUSE METER FUSE |
*8 |
COMBINATION METER ASSEMBLY |
*9 |
STOP LIGHT SWITCH ASSEMBLY |
- |