SEAT BELT WARNING SYSTEM DATA LIST / ACTIVE TEST
DATA LIST
Note:In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tip:Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter or Main Body / Data List.
Read the Data List according to the display on the GTS.
Body Electrical > Combination Meter > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
P-Seatbelt Buckle SW
Front passenger seat belt buckle switch signal
ON or OFF
OFF: Front passenger seat belt fastened
ON: Front passenger seat belt not fastened
The front passenger seat is occupied
2nd-Row Seatbelt Buckle (R)
Rear RH seat belt buckle switch signal*
ON or OFF
OFF: Rear RH seat belt fastened
ON: Rear RH seat belt not fastened
-
2nd-Row Seatbelt Buckle (L)
Rear LH seat belt buckle switch signal*
ON or OFF
OFF: Rear LH seat belt fastened
ON: Rear LH seat belt not fastened
-
2nd-Row Seatbelt Buckle (C)
Rear center seat belt buckle switch signal*
ON or OFF
OFF: Rear center seat belt fastened
ON: Rear center seat belt not fastened
-
Driver Side Seatbelt Warning Buzzer
Driver seat belt warning buzzer
ON or OFF
Customized value displayed
-
P-Seatbelt Warning Buzzer
Front passenger seat belt warning buzzer
ON or OFF
Customized value displayed
-
Rear Seatbelt Warning Buzzer
Rear seat belt warning buzzer*
ON or OFF
Customized value displayed
-
*: w/ Rear Seat Belt Warning
Body Electrical > Main Body > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
RR Door Courtesy SW
Rear door courtesy light switch RH*
ON or OFF
ON: Rear door RH open
OFF: Rear door RH closed
-
RL Door Courtesy SW
Rear door courtesy light switch LH*
ON or OFF
ON: Rear door LH open
OFF: Rear door LH closed
-
D Seat Buckle SW
Driver seat belt buckle switch
ON or OFF
ON: Driver seat belt unfastened
OFF: Driver seat belt fastened
-
*: w/ Rear Seat Belt Warning
ACTIVE TEST
Tip:Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test
Tester Display
Measurement Item
Control Range
Diagnostic Note
Driver Side Seat Belt
Seat belt warning light
OFF/ON
-
Rear Seat Belt
Rear seat belt warning light*
OFF/ON
-
*: w/ Rear Seat Belt Warning