ULTRASONIC SENSOR(for Sedan Rear Side) REMOVAL

PROCEDURE

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 3 ULTRASONIC SENSOR

    Tip:

    • This illustrations are for the corner sensor LH side or back sensor. The orientation for the corner sensor RH side is the opposite of the corner sensor LH side and back sensor.

    • Use the same procedure for all No. 3 ultrasonic sensors.

    1. E275138

      Disengage the clamp.

    2. E275139

      Disconnect the connector.

    3. E275140

      Disengage the 2 claws to remove the No. 3 ultrasonic sensor.

  3. REMOVE ULTRASONIC SENSOR CLIP

    1. E275141

      Disengage the 2 claws to remove the ultrasonic sensor clip.

      Tip:

      • This illustration is for the corner sensor LH side or back sensor. The orientation for the corner sensor RH side is the opposite of the corner sensor LH side and back sensor.

      • Use the same procedure for all ultrasonic sensor clips.

  4. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER