RADIO ANTENNA HOLDER INSTALLATION

PROCEDURE

1. INSTALL WITH HOLDER ANTENNA ASSEMBLY

   1. Attach the 2 claws to install the with holder antenna assembly.

   2. 

      Install the nut.

      4.5 N*m

      46 kgf*cm

      40 in.*lbf

   3. Connect the connector.

2. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY

   Click here

3. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick here

5. CHECK SRS WARNING LIGHT

   Click here