ROOF HEADLINING(for Hatchback) REMOVAL

PROCEDURE

  1. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    1. Remove the deck board assembly.

  2. REMOVE REAR FLOOR MAT ASSEMBLY

    1. Remove the rear floor mat assembly.

  3. REMOVE REAR DECK FLOOR BOX (w/ Deck Floor Box)

    1. B327607

      Disengage the guide to remove the rear deck floor box.

  4. REMOVE DECK FLOOR BOX LH (w/ Deck Floor Box)

    1. B327608

      w/o Woofer:

      1. Remove the 2 nuts.

      2. Disengage the claw to remove the deck floor box LH.

    2. B330905

      w/ Woofer:

      1. Remove the nut.

      2. Disengage the claw to remove the deck floor box LH.

  5. REMOVE DECK FLOOR BOX RH (w/ Deck Floor Box)

    1. B327609

      Remove the 2 nuts and deck floor box RH.

  6. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    1. Remove the package tray trim panel assembly.

  7. REMOVE REAR DECK TRIM COVER

    1. B327610

      for Clip Type:

      1. Turn the 2 clips in the direction indicated by the arrow shown in the illustration to remove them.

    2. B327612

      for Hook Type:

      1. Remove the 2 bolts.

      2. Disengage the 2 guides to remove the 2 luggage hold belt striker assemblies.

    3. B327613

      w/o Deck Board:

      1. Disengage the 4 claws, 4 clips and 2 guides to remove the rear deck trim cover.

    4. B327645

      w/ Deck Board:

      1. Disengage the 4 claws, 4 clips and 4 guides to remove the rear deck trim cover.

  8. REMOVE REAR SEAT ASSEMBLY

    Click here

  9. REMOVE FRONT DOOR SCUFF PLATE LH

    1. B333776

      Disengage the 10 claws to remove the front door scuff plate LH.

  10. REMOVE COWL SIDE TRIM BOARD LH

    1. B333777

      Remove the clip.

    2. Disengage the claw and clip to remove the cowl side trim board LH.

  11. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    1. Remove the front door opening trim weatherstrip LH.

  12. REMOVE FRONT PILLAR GARNISH LH

    1. B351726C01

      *a

      Front Pillar Garnish Clip

      Pull the upper part of the front pillar garnish LH toward the inside of the cabin and disengage the front pillar garnish LH from the base of the 2 clips.

      Tip:

      Let the front pillar garnish LH hang from the front pillar garnish clip.

    2. B351727C01

      *a

      Protective Tape

      *b

      90°

      Using needle-nose pliers with the tips wrapped with protective tape, rotate the front pillar garnish clip 90° in the direction indicated by the arrow (1) shown in the illustration.

    3. Pull the front pillar garnish LH in the direction indicated by the arrow (2) shown in the illustration to disengage it from the front pillar garnish clip.

      Note:

      • A front pillar garnish clip is reusable if it is not removed from the vehicle and have is not damaged.

      • Replace the front pillar garnish clip with a new one if it is removed from the vehicle.

    4. Pull the front pillar garnish LH in the direction indicated by the arrow (3) shown in the illustration to disengage the 3 guides and remove the front pillar garnish LH.

    5. B333780C01

      *1

      Curtain Shield Airbag Assembly LH

      *a

      Adhesive Tape

      *b

      Protective Cover

      Protect the curtain shield airbag assembly LH.

      1. Cover the curtain shield airbag assembly LH with a piece of cloth or nylon and secure the edges of the cover with tape as shown in the illustration.

        Note:

        Cover the curtain shield airbag assembly LH with a protective cover as soon as the front pillar garnish is removed.

  13. REMOVE REAR DOOR SCUFF PLATE LH

    1. B333781

      Disengage the 8 claws to remove the rear door scuff plate LH.

  14. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    1. Remove the rear door opening trim weatherstrip LH.

  15. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click hereClick here

  16. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click hereClick here

  17. REMOVE CENTER PILLAR LOWER GARNISH LH

    1. B333782

      Disengage the 2 claws, 3 clips and 2 guides to remove the center pillar lower garnish LH.

  18. REMOVE CENTER PILLAR GARNISH ASSEMBLY LH

    1. B333783

      Remove the 2 screws.

    2. Disengage the clip.

    3. Pass the floor anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH to remove it.

    4. Remove the clip from the center pillar garnish assembly LH.

  19. REMOVE FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  20. REMOVE COWL SIDE TRIM BOARD RH

    Tip:

    Use the same procedure as for the LH side.

  21. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  22. REMOVE FRONT PILLAR GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  23. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  24. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  25. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  26. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  27. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  28. REMOVE CENTER PILLAR GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  29. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    1. B333784

      Loosen the bolt to remove the rear seatback hinge sub-assembly LH.

  30. REMOVE REAR SEAT SIDE GARNISH LH

    1. B330894

      Disengage the 5 claws and 2 clips to remove the rear seat side garnish LH.

  31. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side)

    1. B333785

      Remove the screw.

    2. Disengage the pin to remove the No. 2 deck side trim hook.

  32. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Deck Board)

    1. B330895

      Disengage the guide to remove the lower deck trim side board LH.

  33. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    1. B330896C01

      *a

      Protective Tape

      for Clip Type:

      1. Using a clip remover, disengage the clip and guide to remove the deck trim service hole cover.

        Tip:

        Tape the clip remover tip before use.

    2. for Hook Type:

      1. B330897

        Remove the bolt.

      2. Disengage the guide to remove the luggage hold belt striker assembly.

    3. B330906

      w/ Deck Board:

      1. Remove the clip.

      2. Disengage the 2 clips to remove the deck side trim box LH.

    4. Disengage the 3 claws, 4 clips and 2 guides and disconnect the deck trim side panel assembly LH.

      B330893

    5. Disconnect the connector to remove the deck trim side panel assembly LH.

  34. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    1. Disengage the 6 clips to remove the roof side inner garnish assembly LH.

      B333786N01

    2. Remove the clip (A) from the roof side inner garnish assembly LH.

  35. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  36. REMOVE REAR SEAT SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  37. REMOVE NO. 2 DECK SIDE TRIM HOOK (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  38. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/ Deck Board)

    Tip:

    Use the same procedure as for the LH side.

  39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  40. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  41. REMOVE UPPER INSTRUMENT PANEL

    Click here

  42. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    Click here

  43. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  44. REMOVE MAP LIGHT ASSEMBLY

    Click here

  45. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Slide Switch Type)

    Click here

  46. REMOVE ASSIST GRIP ASSEMBLY

    Tip:

    Use the same procedure to remove all assist grip assemblies.

    1. B333787C01

      *a

      Protective Tape

      Using a screwdriver, disengage the 2 claws to remove the assist grip cover LH.

      Tip:

      Tape the screwdriver tip before use.

    2. Remove the assist grip cover RH.

      Tip:

      Use the same procedure as for the LH side.

    3. B333788

      Disengage the 2 clips to remove the assist grip.

    4. Remove the 2 clips from the vehicle body.

  47. REMOVE REAR ASSIST GRIP ASSEMBLY LH

    1. B333833C01

      *a

      Protective Tape

      Using a screwdriver, disengage the 2 claws to remove the assist grip cover LH.

      Tip:

      Tape the screwdriver tip before use.

    2. Remove the assist grip cover RH.

      Tip:

      Use the same procedure as for the LH side.

    3. B333834

      Disengage the 2 clips to remove the assist grip.

    4. Remove the 2 clips from the vehicle body.

  48. REMOVE REAR ASSIST GRIP ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  49. REMOVE VISOR ASSEMBLY LH

    1. B333789

      for "TORX" Screw:

      1. Using a T25 "TORX" socket wrench, remove the 2 screws and visor assembly LH.

    2. except "TORX" Screw:

      1. Remove the 2 screws and visor assembly LH.

  50. REMOVE VISOR ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  51. REMOVE ROOF HEADLINING ASSEMBLY (for Standard Roof)

    1. w/ EC Mirror:

      1. Disconnect the connector.

    2. w/ Rain Sensor:

      1. Disconnect the connector.

    3. B333831

      for LHD Front Pillar LH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 6 clamps.

    4. B327646

      for RHD Front Pillar LH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 5 clamps.

    5. B333832

      for Front Pillar RH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    6. B327647

      for Rear Pillar RH Side:

      1. Remove the bolt.

      2. Disengage the guide to disconnect the connector bracket.

      3. Disconnect the connector.

    7. B223017C02

      *a

      45°

      Turn the visor holder approximately 45° and pull it out as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    8. Disengage the 2 claws to remove the visor holder.

      Tip:

      Use the same procedure for the RH side and LH side.

    9. w/o Vanity Light:

      B327650

      1. Using a clip remover, remove the 3 clips.

      2. Disengage the 2 guides.

    10. w/ Vanity Light:

      B327649

      1. Using a clip remover, remove the 5 clips.

      2. Disengage the 2 guides.

    11. B327652

      Remove the roof headlining assembly from the vehicle through the back door as shown in the illustration.

      Note:

      Do not damage the roof headlining assembly or vehicle interior.

  52. REMOVE ROOF HEADLINING ASSEMBLY (for Glass Roof)

    1. w/ EC Mirror:

      1. Disconnect the connector.

    2. w/ Rain Sensor:

      1. Disconnect the connector.

    3. B333831

      for LHD Front Pillar LH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 6 clamps.

    4. B327646

      for RHD Front Pillar LH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 5 clamps.

    5. B333832

      for Front Pillar RH Side:

      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    6. B327648

      for Rear Pillar LH Side:

      1. Disconnect the connector.

    7. B327647

      for Rear Pillar RH Side:

      1. Remove the bolt.

      2. Disengage the guide to disconnect the connector bracket.

      3. Disconnect the connector.

    8. B223017C02

      *a

      45°

      Turn the visor holder approximately 45° and pull it out as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    9. Disengage the 2 claws to remove the visor holder.

      Tip:

      Use the same procedure for the RH side and LH side.

    10. Using a clip remover, remove the 3 clips.

      B327651C01

      *a

      Guide (A)

      *b

      Guide (B)

      *c

      Fastener

      -

      -

    11. Disengage the 2 guides (A).

    12. Disengage the 14 fasteners.

      Tip:

      Disengage the fasteners from the rear side of the roof headlining assembly.

    13. Pull the roof headlining assembly toward the rear of the vehicle to disengage the guide (B).

    14. B329077

      Remove the roof headlining assembly from the vehicle through the back door as shown in the illustration.

      Note:

      Do not damage the roof headlining assembly or vehicle interior.