TOYOTA PARKING ASSIST-SENSOR SYSTEM(for Sedan with Simple Intelligent Parking Assist System) DATA LIST / ACTIVE TEST

  1. ACTIVE TEST

    Tip:

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Clearance Sonar/Simple-IPA. / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Body Electrical > Clearance Sonar/Simple-IPA > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Front Buzzer

      No. 1 clearance warning buzzer

      Stop or Operate

      Confirm that the vehicle is stopped and the ignition switch is ON

      Rear Buzzer

      No. 2 clearance warning buzzer

      Stop or Operate

      Confirm that the vehicle is stopped and the ignition switch is ON