SEAT ASSEMBLY


  1. CONSTRUCTION


    1. A 60/40 split folding rear seat is provided.

    2. Cup holders integrated into the armrest are provided.

    3. Saddle-shaped headrests are provided.

    4. For models without rear power seats, a reclining lever is provided on the seat cushion sides.

      B004Z2YC02
      *1 Rear Seat Center Armrest Cup Holder *2 Rear Reclining Lever
      *a The illustration shown is an example only. - -

    5. For models without rear power seats, dampers are provided for the reclining mechanism.

      B004Z2RC02
      *1 Damper - -
      *a Provided for Left and Right Rear Outside Seats - -

    6. ISO-FIX bars for securing child seats are provided behind the seat cushion of the rear seat.

    7. Top tether anchor bars are provided for the rear seats. In addition, covers (child restraint seat tether anchor covers) are provided for the top tether anchor bars (child restraint seat tether anchor bracket) in consideration of appearance.

      Figure 1. Except Destination Package for South Korea, Australia and New Zealand

      B004Z7KC01
      *1 ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly) *2 Top Tether Anchor Bar
      *3 Cover (Child Restraint Seat Tether Anchor Cover) - -
      *a The illustration shown are example only. - -

      Figure 2. Destination Package for South Korea, Australia and New Zealand

      B004YX6C02
      *1 ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly) *2 Top Tether Anchor Bar
      *3 Cover (Child Restraint Seat Tether Anchor Cover) - -
      *a The illustration shown are example only. - -