LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point G, g and H, h on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Quarter Panel Standard Hole | φ10 (0.39) |
| C, c | Quarter Inner Panel Rear/Upper Back Panel Adjoining Portion | - |
| D, d | Quarter Panel Extension Lower Rear/Upper Back Panel Adjoining Portion | - |
| E, e | Quarter Panel Extension Lower Rear/Lower Back Panel Adjoining Portion | - |
| F, f | Quarter Panel Standard Hole | φ12 (0.47) |
| G | Trim Installation Hole | 8X20 (0.31X0.79) |
| g | Trim Installation Hole | 8X25 (0.31X0.98) |
| H, h | Lock Striker Installation Nut | M12 (0.47) |
| J, j | Rear Suspension Installation Hole | φ13 (0.51) |
| K, k | Rear Floor Pan Front Standard Hole | φ10 (0.39) |
| L, l | Front Body Pillar Assembly Mark | - |
| *1 | Distance between points other than those above |
| *2 | mm |
| *3 | (in.) |