PTC HEATER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL QUICK HEATER ASSEMBLY


    1. B008KIOC01
      B008LJK Install in this Direction

      Install the quick heater assembly with the 2 screws as shown in the illustration.

    2. B008M4S

      Connect the connector.

    3. Engage the clamp.

  2. REMOVE NO. 2 HEATER COVER


    1. B008KM9

      Install the No. 2 heater cover with the screw.

  3. INSTALL NO. 1 AIR DUCT

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  6. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here