DIFFERENTIAL PRESSURE SENSOR(for DPF) INSTALLATION

PROCEDURE

  1. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

    1. A273037C01

      *1

      Paint Mark (Yellow)

      *2

      Paint Mark (Red)

      *a

      Front Side of Vehicle

      *b

      LH Side

      Connect the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose assembly to the differential pressure sensor assembly, and slide the 2 clamps labeled A and B to secure the hoses.

      Note:

      Connect the vacuum transmitting hoses so that the painted marks of the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose assembly are as shown in the illustration.

    2. Install the differential pressure sensor assembly with the nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

    3. Connect the differential pressure sensor connector.