COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL COMBINATION METER ASSEMBLY

    1. Connect the 2 connectors.

    2. Attach the 2 clips to install the combination meter assembly.

    3. Install the 2 screws.

  2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here