LANE RECOGNITION CAMERA SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

When replacing the windshield glass of a vehicle equipped with a lane departure warning camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the lane departure warning camera may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or black ceramic border.

PROCEDURE


  1. REMOVE NO. 2 LANE RECOGNITION COVER


    1. Disengage the 2 guides and remove the No. 2 lane recognition cover as shown in the illustration.

      A005CDNE01

  2. REMOVE NO. 1 LANE RECOGNITION COVER


    1. A005A0I

      Disengage the 4 guides and remove the No. 1 lane recognition cover as shown in the illustration.

  3. REMOVE LANE DEPARTURE WARNING CAMERA


    1. A005DBJE01

      Disconnect the connector.

    2. Disengage the 3 guides and remove the lane departure warning camera as indicated by the arrows, in the order shown in the illustration.

      Note


      • Do not pull the harness forcibly when disconnecting the connector.

      • If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.

      • If the lane departure warning camera is dropped, replace it with a new one.