INNER REAR VIEW MIRROR(w/o Pre-collision System) INSPECTION

PROCEDURE

  1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

    1. Check operation of the electrochromic mirror.

      B455187E01
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Inner Rear View Mirror)

      *2

      Black-colored Tape

      *3

      Bright

      *4

      Dark

      1. Connect the positive (+) lead of the battery to terminal 4 and the negative (-) lead to terminal 1.

      2. Attach black-colored tape to the forward sensor to prevent it from sensing light.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

        Tip:

        When the environment is very bright, the antiglare operation may occur immediately after the tape is applied.

        If the result is not as specified, replace the inner rear view mirror.