NAME PLATE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When removing name plates or emblems, heat the vehicle body and name plates using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblems excessively.

PROCEDURE


  1. REMOVE NO. 1 BACK DOOR EMBLEM


    1. Remove the back door outside garnish sub-assembly Click here.

    2. A005CI5

      Disengage the 3 claws and pin, and remove the No. 1 back door emblem.

  2. REMOVE NO. 2 BACK DOOR NAME PLATE


    1. A005BL0E02
      Text in Illustration
      *A Type A
      *B Type B
      *1 Protective Tape

      Put protective tape around the No. 2 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape to remove the No. 2 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 2 back door name plate.

      • Be careful not to damage the vehicle body.

  3. REMOVE NO. 1 BACK DOOR NAME PLATE


    1. for TOYOTA Plate:


      1. A005ECXE02
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the No. 1 back door name plate.

      2. Using a moulding remover, peel off the double-sided tape to remove the No. 1 back door name plate.

        Note


        • If reusing the emblems, take care not to damage the No. 1 back door name plate.

        • Be careful not to damage the vehicle body.

    2. for Hybrid Plate:


      1. A0059MVE02
        Text in Illustration
        *A Type A
        *B Type B
        *1 Protective Tape

        Put protective tape around the No. 1 back door name plate.

      2. Using a moulding remover, peel off the double-sided tape to remove the No. 1 back door name plate.

        Note


        • If reusing the emblems, take care not to damage the No. 1 back door name plate.

        • Be careful not to damage the vehicle body.

  4. REMOVE SIDE PANEL EMBLEM


    1. A005BZDE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the side panel emblem.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the side panel emblem.

      Note


      • If reusing the name plate, take care not to damage the side panel emblem.

      • Be careful not to damage the vehicle body.

      Tech Tips

      Use the same procedure for the RH side and LH side.