PARKING BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE YAW RATE AND ACCELERATION SENSOR

    Click here

  3. LOOSEN ADJUSTING NUT


    1. A005DNZE03
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  4. SEPARATE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A005B7WE02
      Text in Illustration
      *a Turn
      *b Hold

      Separate the No. 1 parking brake pull rod sub-assembly from the parking brake control pedal assembly as shown in the illustration.

  5. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. A005AL1

      Remove the 4 bolts and nut, and separate the No. 1 parking brake cable assembly.

    2. Disengage the 2 wire harness clamps.

    3. Remove the No. 1 parking brake cable assembly from the clamp.

    4. A0059S1

      Disconnect the parking brake switch connector.

    5. Disengage the wire harness clamp.

    6. A005F17

      Remove the bolt, 2 nuts and parking brake control pedal assembly.