ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C13A9

DTC Code DTC Name
C13A9 Brake System Malfunction

DESCRIPTION

The parking brake ECU assembly receives the wheel speed information of each wheel from the skid control ECU assembly*1 or skid control ECU (brake actuator assembly)*2 via CAN communication.

This DTC is stored when a malfunction occurs in the skid control ECU assembly*1 or skid control ECU (brake actuator assembly)*2.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13A9 Brake System Malfunction
  • Diagnosis Condition:

    Engine switch on (IG)

  • Malfunction Status:

    All speed sensor malfunction signals input from skid control ECU assembly*1

  • Malfunction Status:

    All speed sensor malfunction signals input from skid control ECU (brake actuator assembly)*2

  • Malfunction Duration:

    Approximately 0.3 seconds


  • Skid control ECU assembly*1

  • Skid control ECU (Brake actuator assembly)*2

  • Parking brake ECU assembly

Yes An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note

If the parking brake ECU assembly is replaced, perform the "Reset Memory" and "Acquire Tension Sensor Zero Point" procedures.

Click here

PROCEDURE


  1. CHECK DTC (BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS)


    1. Check for DTC.

      w/o Vacuum Brake Booster: Click here

      w/ Vacuum Brake Booster: Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

    B
    A
  2. CHECK DTC (ELECTRIC PARKING BRAKE SYSTEM)


    1. Clear the DTCs.

      Click here


      Chassis > Electric Parking Brake > Clear DTCs
    2. Turn the engine switch off.

    3. Check for DTC.

      Click here


      Chassis > Electric Parking Brake > Trouble Codes
      Result
      Result Proceed to
      DTC is output A
      DTC is not output B

    A
    B