FUEL INJECTOR(for Direct Injection) INSPECTION

PROCEDURE


  1. INSPECT FUEL INJECTOR ASSEMBLY

    Note

    This inspection aims is to inspect the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are of a high-pressure type and cannot be inspected for fuel injection volume.


    1. A004HW8E01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Injector Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 1.9 Ω

      If the result is not as specified, replace the fuel injector assembly.