DRIVE BELT INSTALLATION

PROCEDURE

  1. INSTALL V-RIBBED BELT

    1. Install the V-ribbed belt.

  2. ADJUST V-RIBBED BELT

    1. A296628N01

      Turn the bolt (C) to adjust the tension of the V-ribbed belt.

    2. Tighten the bolts (A) and (B).

      Bolt A

      25 N*m

      255 kgf*cm

      18 ft.*lbf

      Bolt B

      43 N*m

      438 kgf*cm

      32 ft.*lbf

      Note:

      Do not loosen the bolt (D).

  3. INSPECT V-RIBBED BELT

    Click here

  4. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  5. INSTALL NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    1. Install the No. 1 engine under cover with the 7 clips and 6 bolts.

  6. INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)

    1. Install the No. 1 engine under cover with the 2 clips and 9 bolts.

  7. INSTALL FRONT WHEEL RH

    103 N*m

    1050 kgf*cm

    76 ft.*lbf