STEERING PAD SWITCH REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STEERING PAD

    Click here

  4. REMOVE STEERING PAD SWITCH LH


    1. Disconnect each connector.

    2. B007PGCE01
      Text in Illustration
      *1 Pin
      *2 Guide

      Remove the screw.

    3. Detach the 2 pins and guide and remove the steering pad switch LH.