FRONT DOOR SPEAKER INSPECTION

PROCEDURE

  1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

    1. for 14 Speakers:

      1. E144966C01

        *a

        Component without harness connected

        (Front No. 1 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        5.0 to 7.0 Ω

        If the result is not as specified, replace the front No. 1 speaker assembly.

    2. for 9 Speakers:

      1. E144966C01

        *a

        Component without harness connected

        (Front No. 1 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        1 - 2

        Always

        4 Ω

        If the result is not as specified, replace the front No. 1 speaker assembly.