REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH

    1. E270433C01

      *1

      Protective Tape

      Put protective tape around the rear combination light assembly LH.

    2. Remove the 2 bolts.

    3. Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 2 clips.

    4. E269009

      Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to disconnect them as a unit.

    5. E269005

      Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to disconnect them as a unit.

    6. Remove the rear combination light lens and body LH.

  2. REMOVE TAIL AND STOP LIGHT BULB

    1. E269007

      Remove the tail and stop light bulb from the tail and stop light bulb socket.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB

    1. E269011

      Remove the rear turn signal light bulb from the rear turn signal light bulb socket.