REAR SPEED SENSOR(for AWD) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The rear speed sensor rotor is a component of the rear axle hub and bearing assembly. If the rear speed sensor rotor is malfunctioning, replace the rear axle hub and bearing assembly.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE NO. 2 PARKING BRAKE WIRE ASSEMBLY (for LH Side)


    1. B007X2S

      Disconnect the connector.

    2. A01VV7X

      Remove the bolt and separate the No. 2 parking brake wire assembly from the rear axle carrier sub-assembly LH.

    3. A01RE8Q

      Remove the bolt and separate the No. 2 parking brake wire assembly from the sensor clamp.

  3. REMOVE NO. 1 PARKING BRAKE WIRE ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure for the No. 2 parking brake wire assembly.

  4. REMOVE REAR SPEED SENSOR LH (w/o AVS)


    1. A01R953

      Disconnect the rear speed sensor connector.

    2. Remove the nut and separate the sensor clamp from the rear suspension member sub-assembly.

    3. A01VVDV

      Remove the 2 bolts and separate the 2 sensor clamps from the rear upper control arm assembly LH.

    4. A01VUG6

      Remove the 2 bolts, sensor clamp and rear speed sensor LH from the rear axle carrier sub-assembly LH and rear trailing arm assembly LH.

      Note


      • Keep the tip of the rear speed sensor LH and installation hole free of foreign matter.

      • Do not rotate or apply excessive force to the rear speed sensor LH when removing it from the rear axle carrier sub-assembly LH. Rotating or applying excessive force may result in damage to the rear speed sensor LH.

  5. REMOVE REAR SPEED SENSOR LH (w/ AVS)


    1. A01RD1I

      Disconnect the rear speed sensor connector.

    2. Remove the bolt and separate the sensor clamp from the rear upper control arm assembly LH.

    3. A01VUG6

      Remove the 2 bolts, sensor clamp and rear speed sensor LH from the rear axle carrier sub-assembly LH and rear trailing arm assembly LH.

      Note


      • Keep the tip of the rear speed sensor LH and installation hole free of foreign matter.

      • Do not rotate or apply excessive force to the rear speed sensor LH when removing it from the rear axle carrier sub-assembly LH. Rotating or applying excessive force may result in damage to the rear speed sensor LH.

  6. REMOVE REAR SPEED SENSOR RH (w/o AVS)


    1. A01RDO3

      Disengage the clamp and separate the wire harness from the sensor clamp.

    2. A01RCUJ

      Disconnect the rear speed sensor connector.

    3. Remove the nut and separate the sensor clamp from the rear suspension member sub-assembly.

    4. A01RBKZ

      Remove the 2 bolts and separate the 2 sensor clamps from the rear upper control arm assembly RH.

    5. A01RBUA

      Remove the 2 bolts, sensor clamp and rear speed sensor RH from the rear axle carrier sub-assembly RH and rear trailing arm assembly RH.

      Note


      • Keep the tip of the rear speed sensor RH and installation hole free of foreign matter.

      • Do not rotate or apply excessive force to the rear speed sensor RH when removing it from the rear axle carrier sub-assembly RH. Rotating or applying excessive force may result in damage to the rear speed sensor RH.

  7. REMOVE REAR SPEED SENSOR RH (w/ AVS)


    1. A01RCW5

      Disconnect the rear speed sensor connector.

    2. Remove the bolt and separate the sensor clamp from the rear upper control arm assembly RH.

    3. A01RBUA

      Remove the 2 bolts, sensor clamp and rear speed sensor RH from the rear axle carrier sub-assembly RH and rear trailing arm assembly RH.

      Note


      • Keep the tip of the rear speed sensor RH and installation hole free of foreign matter.

      • Do not rotate or apply excessive force to the rear speed sensor RH when removing it from the rear axle carrier sub-assembly RH. Rotating or applying excessive force may result in damage to the rear speed sensor RH.