AUDIO AND VISUAL SYSTEM (for Radio and Display Type) CD cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER DISC IS INSERTED

   
   

   1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      Disc is normal.

      Tech Tips

      
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to Owner's Manual.

   
   

   NG

   CHANGE DISC

   OK

2. CHECK THAT DISC IS INSERTED PROPERLY

   
   

   1. Check if the disc is inserted upside down.

      OK
      The disc is properly inserted.

   
   

   NG

   INSERT DISC PROPERLY

   OK

3. CHECK DISC

   
   

   1. 

      Disc cleaning

      
      

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

         OK
         Malfunction disappears.

         Note

         Do not use a conventional record cleaner or antistatic preservative.

   
   

   NG

   REPLACE DISC WITH ANOTHER AND RECHECK Click here

   OK

   END (DISC IS DIRTY)

4. REPLACE DISC WITH ANOTHER AND RECHECK

   
   

   1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   

   NG

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

   OK

   END (DISC IS DEFECTIVE)