CLEARANCE WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

   1. Attach the clamp to install the No. 1 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System)

   Click hereClick here

3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

   Click hereClick here

4. INSTALL RADIO RECEIVER ASSEMBLY

   1. w/o Navigation System:

      Install the radio receiver assembly (Click hereClick here).

   2. w/ Navigation System:

      Install the radio receiver assembly (Click hereClick here).

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click hereClick here

6. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

   Click hereClick here

7. INSTALL FRONT UPPER CONSOLE PANEL GARNISH

   Click hereClick here

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click hereClick here

14. INSTALL INSTRUMENT SIDE PANEL RH

    Click hereClick here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).