GLOW PLUG REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  3. REMOVE NO. 1 ENGINE COVER

    Click hereClick hereClick here

  4. DISCONNECT ENGINE WIRE

    1. A316913

      Using a T25 "TORX" socket wrench, remove the screw and disconnect the engine wire so that the glow plug assemblies can be removed in a later step.

  5. REMOVE GLOW PLUG ASSEMBLY

    1. Disconnect the 4 glow plug assembly connectors.

    2. A316914N01

      Using SST, remove the 4 glow plug assemblies.

      SST

      PZ4TB-04910-68