SEAT BELT CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL SEAT BELT CONTROL ECU

   1. Install the seat belt control ECU with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

   2. Connect the 2 connectors.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click hereClick here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click hereClick here

4. INSTALL COWL SIDE TRIM BOARD LH

   Click hereClick here

5. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

   Click hereClick here

6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

9. CHECK SRS WARNING LIGHT

   1. Check the SRS warning light (Click hereClick hereClick here).