ENTRY AND START SYSTEM(for Entry Function) OPERATION HISTORY LIST

Note:

When using the GTS with the power switch off to troubleshoot: Connect the GTS to the DLC3 and turn a courtesy light switch on and off at 1.5-second intervals until communication between the GTS and vehicle begins.

  1. OPERATION HISTORY

    Tip:

    The certification ECU (smart key ECU assembly) stores the operation history of the entry and start system and it can be read using the GTS.

    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Entry&Start / Utility / Operation History.

    5. Check the freeze frame data.

Table 1. Auto Entry Wireless Operation History

Parameter Name

Content

Kick Sensor Open Request Signal.

The multiplex network door ECU receives kick detection signals from the kick door control sensor and sends certification requests to the certification ECU (smart key ECU assembly). If certification is OK, an open permission is sent to the multiplex network door ECU.