CAMSHAFT POSITION SENSOR (w/o EGR Cooler) INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR

    A01DY4S

    1. Apply a light coat of engine oil to the O-ring of the sensor.

    2. Install the sensor with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    3. Connect the sensor connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  3. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.