BACK DOOR OPENING TROUGH CUT AND JOIN REPLACEMENT SECTIONS

A01GHHQ


  1. REMOVAL

    Symbol Meaning
    B002F5A Remove Weld Points
    B002F3X Remove Weld Points
    A01GH60 Cut and Join Location
    A01GH5KC01
    *a 150 mm (5.91 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B002F3I Plug Weld
    B002F4M Plug Weld
    A01GH73 Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01GHBEC01
      *1 QUARTER PANEL EXTENSION SUB-ASSEMBLY REAR LOWER - -

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.