TILT SENSOR INSTALLATION

PROCEDURE

  1. INSTALL THEFT WARNING TILT SENSOR

    1. Install the theft warning tilt sensor with the 2 bolts.

      14.5 N*m

      148 kgf*cm

      11 ft.*lbf

      Note:

      • Do not damage the theft warning tilt sensor.

      • Make sure that the theft warning tilt sensor is installed securely.

    2. Connect the connector.

  2. INSTALL YAWRATE SENSOR BRACKET

    1. Attach the guide.

    2. Install the yaw rate sensor bracket with the bolt.

      14.5 N*m

      148 kgf*cm

      11 ft.*lbf

    3. Return the floor carpet to its original position.

  3. INSTALL LOWER CENTER PILLAR GARNISH LH

    Click here

  4. INSTALL OUTER LAP BELT ANCHOR COVER

    Click hereClick here

  5. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  6. INSTALL FRONT DOOR SCUFF PLATE LH

    Click hereClick here

  7. INSTALL COWL SIDE TRIM BOARD LH

    Click hereClick here

  8. INSTALL FRONT SEAT ASSEMBLY LH

    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  10. INSTALL DECK BOARD ASSEMBLY

    Click here