PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) SYSTEM DESCRIPTION

  1. GENERAL

    1. This system has a television camera assembly mounted on the back door to display an image of the area behind the vehicle on the display. The display panel also shows a composite view consisting of the area behind the vehicle and parking guide lines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.

    2. This system consists of the following components:

      1. Television camera assembly

      2. Radio and display receiver assembly

      3. Spiral with sensor cable sub-assembly

      4. Main body ECU (multiplex network body ECU)

      5. Back door lock assembly

    3. This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system.

  2. FUNCTION OF COMPONENTS

    1. The television camera assembly controls the system by using information from the following components.

      Item

      Function

      Television Camera Assembly

      • Mounted on the back door to transmit an image of the area behind the vehicle to the radio and display receiver assembly.

      • Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.

      • Performs overall control of the system by receiving signals from the sensors.

      • Creates images and displays adjustment screens performed on the diagnosis screen.

      • Stops displaying the guide lines when an open signal is received for the back door.

      • Displays "Back door is open" on the back camera position setting screen when an open signal is received for the back door.

      Radio and display receiver assembly

      Receives video signals, which contain an image of the area behind the vehicle taken with the television camera assembly.

      Spiral with Sensor Cable Sub-assembly

      Detects the angle of the steering wheel and sends the resulting signals to the television camera assembly through CAN communication.

      Main Body ECU (Multiplex Network Body ECU)

      Transmits a back door courtesy switch signal to the rear television camera assembly through CAN communication.

      Back Door Lock Assembly

      Transmits a back door courtesy switch signal to the main body ECU (multiplex network body ECU) through CAN communication.

  3. OPERATION EXPLANATION

    1. The television camera assembly sends the display signal to the radio and display receiver assembly. The radio and display receiver assembly receives the reverse signal via a CAN communication line when the power switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the radio and display receiver assembly switches to the parking assist monitor system.

  4. DIAGNOSTIC FUNCTION OUTLINE

    1. This parking assist monitor system has a diagnostic function displayed on the television camera assembly. This function enables calibration (adjustment and verification) of the parking assist monitor system.

      Click here

    2. The following items for the parking assist monitor system can be checked using the GTS.

      Item

      Proceed to

      DTC

      Click here

      Data List / Active Test

      Click here