ULTRASONIC SENSOR(for Sedan Front Side) INSTALLATION

PROCEDURE

  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    1. E278875C01

      *a

      Protrusion

      *b

      Cutout

      Install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note:

      • Do not damage the front bumper assembly with the protrusion when installing the No. 1 ultrasonic sensor retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the No. 1 ultrasonic sensor retainer and surface of the front bumper assembly.

      Tip:

      • When installing the No. 1 ultrasonic sensor retainer, align the cutout and protrusion as shown in the illustration.

      • This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

      • Use the same procedure for all No. 1 ultrasonic sensor retainers.

  2. INSTALL ULTRASONIC SENSOR CLIP

    Tip:

    Use the same procedure for all ultrasonic sensor clips.

    1. Engage the 2 claws to install the ultrasonic sensor clip.

  3. INSTALL NO. 1 ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all No. 1 ultrasonic sensors.

    1. Engage the 2 claws to install the No. 1 ultrasonic sensor.

    2. Connect the connector.

  4. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

    1. E278881C01

      *a

      Protrusion

      *b

      Cutout

      Install the No. 2 ultrasonic sensor retainer to the front bumper assembly.

      Note:

      • Do not damage the front bumper assembly with the protrusion when installing the No. 2 ultrasonic sensor retainer.

      • Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the No. 2 ultrasonic sensor retainer and surface of the front bumper assembly.

      Tip:

      • When installing the No. 2 ultrasonic sensor retainer, align the cutout and protrusion as shown in the illustration.

      • This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

      • Use the same procedure for all No. 2 ultrasonic sensor retainers.

  5. INSTALL ULTRASONIC SENSOR CLIP (w/ Simple Intelligent Parking Assist System)

    Tip:

    Use the same procedure for all ultrasonic sensor clips.

    1. Engage the 2 claws to install the ultrasonic sensor clip.

  6. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

    Tip:

    Use the same procedure for all No. 2 ultrasonic sensors.

    1. Engage the 2 claws to install the No. 2 ultrasonic sensor.

    2. Connect the connector.

    3. E278877

      Slide the connector lock as shown in the illustration.

      Tip:

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  7. INSTALL FRONT BUMPER ASSEMBLY

    Click here