BRAKE SYSTEM (OTHER) TORQUE SPECIFICATIONS
Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
|||
|---|---|---|---|---|---|---|---|
Disc brake cylinder bleeder plug |
Front |
12 N*m |
122 kgf*cm |
9 ft.*lbf |
|||
Rear |
11 N*m |
112 kgf*cm |
8 ft.*lbf |
||||
Brake line flare nut (M10) |
Specified tightening torque |
15.2 N*m |
155 kgf*cm |
11 ft.*lbf |
|||
For use with a union nut wrench |
13.38 N*m |
136 kgf*cm |
10 ft.*lbf |
||||
Brake line flare nut (M12) |
Specified tightening torque |
19.5 N*m |
199 kgf*cm |
14 ft.*lbf |
|||
For use with a union nut wrench |
17.36 N*m |
177 kgf*cm |
13 ft.*lbf |
||||
Clevis lock nut |
22 N*m |
224 kgf*cm |
16 ft.*lbf |
||||
Brake pedal sub-assembly x brake pedal support sub-assembly |
36.8 N*m |
375 kgf*cm |
27 ft.*lbf |
||||
Brake pedal support assembly x brake booster assembly |
12.7 N*m |
130 kgf*cm |
9 ft.*lbf |
||||
Brake pedal support assembly x instrument panel reinforcement assembly |
23.6 N*m |
241 kgf*cm |
17 ft.*lbf |
||||
Brake master cylinder reservoir assembly set screw |
4.0 N*m |
41 kgf*cm |
35 in.*lbf |
||||
Brake master cylinder sub-assembly x brake booster assembly |
20 N*m |
204 kgf*cm |
15 ft.*lbf |
||||
Outer cowl top panel set bolt |
12 N*m |
122 kgf*cm |
9 ft.*lbf |
||||
Front No. 1 brake tube way set bolt |
7.0 N*m |
71 kgf*cm |
62 in.*lbf |
||||
No. 3 heater bracket sub-assembly set nut |
9.8 N*m |
100 kgf*cm |
87 in.*lbf |
||||
Vacuum pump assembly set bolt |
21 N*m |
214 kgf*cm |
15 ft.*lbf |
||||
End cover set screw |
for 8NR-FTS |
7.5 N*m |
76 kgf*cm |
66 in.*lbf |
|||