HIGH MOUNTED STOP LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Note

When installing the center stop light set, perform the installation procedure from step 2.

PROCEDURE


  1. INSTALL CENTER STOP LIGHT ASSEMBLY


    1. Connect the center stop light assembly connector.

    2. A005C9W

      Install the center stop light assembly with the 2 screws.

  2. INSTALL CENTER STOP LIGHT SET


    1. Secure the wire running through the rear spoiler assembly to the center stop light set wire harness.

    2. Pull the wire to pass the center stop light set wire harness through the spoiler.

      Note

      Do not apply excessive force when pulling the wire harness or it may break.

    3. Install the center stop light set with the 2 screws to the rear spoiler assembly.

      Torque:
      1.0 N*m  { 10 kgf*cm, 9 in.*lbf }

    4. Remove the wire from the center stop light set wire harness.

    5. Connect the connector.

  3. INSTALL BACK DOOR CENTER GARNISH

    Click here