HYBRID CONTROL SYSTEM


  1. CONSTRUCTION


    1. The power cable is a set of high-voltage, high-amperage cables that connect the HV battery with theinverter with converter assembly, the inverter with converter assembly with the MG1, MG2 and MGR*, and the inverter with converter assembly with the compressor with motor assembly.

      *: AWD models

    2. The power cable (frame wire) is made of shielded cables in order to reduce electromagnetic interference.

    3. For identification purposes, the high-voltage wiring harness and connectors are color-coded orange to distinguish them from those of ordinary low-voltage wiring.

      A01R2OOC01
      *A AWD Models - -
      *1

      P314 Hybrid Transaxle (Hybrid VehicleTransaxle Assembly)


      • Motor Generator No. 1 (MG1)

      • Motor Generator No. 2 (MG2)

      		 *2 Service Plug Grip
      *3 Compressor with Motor Assembly *4 Inverter with Converter Assembly
      *5 Power Cable (Frame Wire) *6 HV Battery Assembly
      *7 DC-DC Converter (Power Steering Converter Assembly) *8 Q211 Rear Drive Unit (Rear Traction Motor with Transaxle Assembly)