FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP

    1. B371102

      for Resin Type:

      1. Engage the 6 claws to install the front door glass outer weatherstrip.

    2. for Plating Type:

      1. B371104

        Engage the 6 claws to install the front door glass outer weatherstrip.

  2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    w/o Power Window:Click hereClick here

    w/ Power Window:Click hereClick here

  3. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click hereClick here

  4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER

    Click here

  5. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP ASSEMBLY

    Click hereClick here

  6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click hereClick here

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Mirror Heater)

    Click hereClick here

  8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Mirror Heater)

    Click hereClick here

  9. INSTALL FRONT DOOR TRIM COVER

    Click hereClick here

  10. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side with Power Window)

    Click hereClick here

  11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side with Power Window)

    Click hereClick here

  12. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

    Click hereClick here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  14. INSPECT POWER WINDOW OPERATION (w/ Power Window)

    Click here