REAR ACTIVE STABILIZER CONTROL ECU INSTALLATION

PROCEDURE


  1. INSTALL REAR ACTIVE STABILIZER CONTROL ECU


    1. B006A6GN01

      Connect the rear active stabilizer control ECU connector.


      1. Connect the rear active stabilizer control ECU connector. (*1)

      2. Rotate the lever in the direction of the arrow until a "click" sound is heard. (*2)

      3. Lock the lever's lock. (*3)

    2. B006ELU

      Install the rear active stabilizer control ECU with the 3 nuts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    3. B006CG0N01

      Connect the rear active stabilizer control actuator connector labeled A.

    4. Connect the rear active stabilizer control actuator connector labeled B.


      1. Connect the actuator connector. (*1)

      2. Rotate the lever in the direction of the arrow until a "click" sound is heard. (*2)

      3. Lock the lever's lock. (*3)

  2. INSTALL BATTERY CARRIER CATCH BRACKET SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here