PROPELLER SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. B008K9O

      Remove the 2 clips and front No. 2 floor heat insulator from the vehicle body.

  3. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. B008LHH

      Remove the 2 bolts and 2 center No. 2 support bearing washers, and disconnect the propeller with center bearing shaft assembly.

    2. B008KM2C01
      *a Matchmark

      Place matchmarks on the differential carrier assembly and propeller with center bearing shaft assembly.

    3. Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the differential carrier assembly.

    4. B008L26C01
      *a Matchmark

      Place matchmarks on the transfer assembly and propeller with center bearing shaft assembly.

    5. Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the transfer assembly.