ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE

    Click here

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

      A005P8GC01
      B008MCV Protective Tape - -

    2. Remove the 8 clips.

      A005OY7

    3. Remove the 5 screws.

      A005PCK
    4. A005OVQC01
      B008LJK Remove in this Direction

      Remove the screws.

    5. Disengage the claw to disconnect the quarter outside moulding LH as shown in the illustration.

    6. Disengage the clips to remove the rocker panel moulding as shown in the illustration.

      A005ONWC03
      B008LJK Remove in this Direction (1) B008KJ9 Remove in this Direction (2)