PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU), Diagnostic DTC:U1000

DTC Code DTC Name
U1000 CAN Communication Failure (Message Registry)

DESCRIPTION

If DTC U1000 is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U1000

CAN Communication Failure (Message Registry)

ECU malfunction

Television camera assembly

PROCEDURE

  1. CHECK FOR DTC

    1. Clear the DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Clear DTCs

    2. Check for DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Trouble Codes

      OK

      DTC U1000 is not output.

      Result

      Proceed to

      OK

      NG
      Tip:

      If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

      Click here

    OK

    USE SIMULATION METHOD TO CHECK

    Click hereClick hereClick hereClick hereClick here

    NG

    REPLACE TELEVISION CAMERA ASSEMBLY

    Click hereClick here