SPEED LIMITER SYSTEM PRECAUTION
PRECAUTION FOR DISCONNECTING THE BATTERY CABLE
Note:When disconnecting the battery negative (-) cable, initialize the following system(s) after the cable is reconnected:
System
See Procedure
Stop and Start System
Simple Intelligent Parking Assist System
Power Door Lock Control System
IGNITION SWITCH EXPRESSION
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ignition Switch (Position)
Engine Switch (Condition)
Ignition Switch off
LOCK
Off (Lock)
Ignition Switch ACC
ACC
On (ACC)
Ignition Switch ON
ON
On (IG)
Engine start
START
On (Start)
HANDLING PRECAUTION FOR SPEED LIMITER SYSTEM
Turn the speed limiter system off using the speed limiter switch when not using the speed limiter system.
Be careful as the vehicle speed increases when driving downhill with the speed limiter system controlling vehicle speed.
The RESUME/ACCEL operation changes according to the speed limiter system status. When the speed limiter system is controlling vehicle speed, the ACCEL function operates. When the speed limiter system is not controlling vehicle speed, the RESUME function operates.
When the speed limiter system is controlling vehicle speed and the speed limiter indicator blinks, turn the speed limiter system off using the speed limiter switch to reset the speed limiter system. After resetting, if the speed limiter system cannot be turned on, or the speed limiter system is canceled immediately after being turned on, the system may have a malfunction.
Do not use the speed limiter system where the road conditions are as follows:
Steep downhill road
Roads with sharp turns
Icy or snowy roads
Slippery roads
Do not use the speed limiter system when the vehicle is towing a trailer, etc.