FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL

    Note

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. B007U9N

      Push the positions indicated by the arrows in the illustration inward to release the 2 stoppers.

    2. B007ODM

      Pull the glove compartment door assembly in the direction indicated by the arrow shown in the illustration and detach the 2 hinges and remove it.

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. Separate the clamp from the reinforcement.

    2. B007RH8E01

      Disconnect the airbag connector.

    3. B007RR9

      Remove the 2 bolts from the reinforcement.

    4. B007S2S

      Separate the clip and clamp, and remove the instrument panel passenger airbag assembly.

  4. REMOVE INSTRUMENT PANEL WIRE NO.3


    1. B007QZ8

      Disconnect the connector, and remove the instrument panel wire No.3 from the front passenger airbag assembly.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.